Сухие охладители и конденсаторы

Модель LFC/LFC-V Холод 26-850 (кВт)

Расход воздуха (м3/ч) 5500 - 248000

Выносные конденсаторы

 
- 123 модели выносных конденсаторов ЕСА
- 4 скорости вращения вентиляторов: 375, 500, 750 и 1000 об/мин
- Возможность горизонтальной или вертикальной установки конденсатора
КОНСТРУКЦИЯ
Высокотехнологичный теплообменник:
ECA condensers are provided with high-performance finned coils with F 12.7 mm (1/2) grooved tubes in quincunx formation (40.5 x 35 mm) and aluminium streamline fins with a spacing of 2.12 or 2.54 mm depending on the model, for optimal heat exchange.
The use of a 'floating' coil considerably increases the life of the condensers.
Вентиляторы:
The direct drive fans, 762 / 900 mm, are fitted with coupled two-speed motors.
These motors are of the 400 V, three-phase, 50 Hz hermetic 'appliance' type, Class F, according to IEC 34-1, with long-lasting lubrication. If the heated air temperature exceeds 60°C you should consult us. The motors are factory wired and connected, in:
- An electrical equipment box for L models (in line motors)
-Two electrical equipment boxes for P models (motors in parallel)
The 06P, 08P and 12P motors are delta-connected ( D): high speed. 16 P motors are produced by star connecting (Y) 12P motors in the factory.
Speed control: if the process requires precise regulation, we recommend the use of a speed controller; consult us for information.
The protective grilles conform to NF E51.190.
Корпус:
The casing is made from galvanized sheet steel and pre-lacquered galvanized sheet, colour grey RAL7035. The use of 18/10 stainless steel fastenings provides excellent corrosion resistance and durable surface finish.
The equipment is delivered on timber bases.

Модель ECA Холод 24 - 812 (кВт)

Расход воздуха (м3/ч) 5500 - 252000